Friedrich MW12C1H - Manual (Page 20)

1.
2. Select a position where the condensing water can be easily drained out, and the place
is easily connected for outdoor unit.
4. Can select the place where is strong enough to withstand the full weight and vibration of
the unit. And will not increase the noise.
5.
6.
7.
8. Make sure that the indoor unit installation should accord with installation dimension
diagram requirements.
1. Select a location from which noise and outflow air emitted by unit will not inconvenience
neighbors, animals, plants.
2. Select a location where there should be sufficient ventilation.
3. Select a location where there should be no obstructions cover the inlet and outlet vent.
4. The location should be able to withstand the full weight and vibration of the outdoor unit
and permit safe installation.
5. Select a dry place, but do not expose under the direct sunlight or strong wind.
6.
3. Select a location where the children can not reach.
7.
8.
9.
Important Notices
The air inlet and outlet vent should be far from the obstruction, make sure that the air
can be blown through the whole room.
Be sure to leave enough space to allow access for routine maintenance. The height of the
Select a place where the filter can be easily taken out.
dimension diagram, convenient for maintenance, repair.
Select a place where it is out of reach for the children.
Select a place where will not block the passage and do not influence the city appearance.
. Do not use the unit in the immediate surroundings of a laundry a bath a shower or a
swimming pool.
9
Installation
Indoor Unit Placement
Select a place about or more away from TVset or any other electric appliances.
installed location should be or more from the floor.
3 ft
8 ft
Outdoor Unit Placement
Make sure that the outdoor unit installation dimension with installation are in accordance
tubing within . 33 ft
The height difference of connecting the tubing within 16 ft , the length of connecting the
16