Frymaster BID80 Series - Manual (Page 25)

BID80 SERIES GAS FRYERS
CHAPTER 5: BUILT-IN FILTRATION
5-3
5.2 Filtration Preparation
On initial installation and before each use, remove all loose parts from the filter, wash the filter pan
and all accessories in hot, soapy water and dry thoroughly.
5.2.1 Assembling the Filter
The BID80 Series filter system uses filter paper held in place by a hold-down ring to filter impurities
and debris from the cooking medium. The filter pan is assembled with the following components
(see illustration below):
1. Filter pan.
2. Filter support grid.
3. Filter paper.
4. Hold-down ring.
5. Crumb screen.
6. Rear pan cover.
7. Front pan cover.
1
2
3
4
6
7
5