beautypg.com

Maintenance and care – FORD 1998 Contour User Manual

Page 178

background image

Maintenance and care

178

Adjusting the vertical aim

The numbers shown on the vial
indicate beam direction in degrees
up or down.

1. Do not adjust the vertical aim
until after adjusting the horizontal
aim.

2. With the hood open, locate the
bubble level vertical aim indicator.
It is visible when viewed from the
above rear of the headlamp.

3. Turn the vertical adjusting screw
until the reference mark on the
reflector extension aligns with the
“0” reference mark on the vertical
indicator when viewed from
directly above.

4. Close the hood.

CDW VA1-19Maint en C 5/15/97 8:56 PM Page 178