Furman Sound PL-PRO DE II EN - Manual (Page 3)

THE FURMAN MERIT SERIES THE FURMAN MERIT SERIES
IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. Manufacturer
does not warrant against damages or defects
arising out of improper or abnormal use of
handling of the Product; against defects or
damages arising from improper installation,
against defects in products or components
not manufactured by Manufacturer, or
against damages resulting from such non-
Manufacturer made products or components.
This warranty shall be cancelable by
Manufacturer at its sole discretion if the
product is modified in any way without written
authorization from Furman Sound. This
warranty also does not apply to Products upon
which repairs have been affected or attempted
by persons other than pursuant to written
authorization by Manufacturer.
THIS WARRANTY IS EXCLUSIVE. The sole
and exclusive obligation of Manufacturer shall
be to repair or replace the defective Product
in the manner and for the period provided
above. Manufacturer shall not have any other
obligation with respect to the Products or
any part thereof, whether based on contract,
tort, strict liability or otherwise. Under no
circumstances, whether based on this Limited
Warranty or otherwise, shall Manufacturer be
liable for incidental, special, or consequential
damages. Manufacturer’s employees or
representatives’ ORAL OR OTHER WRITTEN
STATEMENTS DO NOT CONSTITUTE
WARRANTIES, shall not be relied upon by
Purchaser, and are not a part of the contract
for sale or this limited warranty. This Limited
Warranty states the entire obligation of
Manufacturer with respect to the Product. If
any part of this Limited Warranty is determined
to be void or illegal, the remainder shall remain
in full force and effect.
S E R V I C E
Before returning any equipment for repair,
please be sure that it is adequately packed
and cushioned against damage in shipment,
and that it is insured. We suggest that you
save the original packaging and use it to ship
the product for servicing. Also, please enclose
a note giving your name, address, phone
number and a description of the problem.
NOTE: All equipment being returned for
repair must have a Return Authorization (RA)
Number. To get an RA Number, please call the
Furman Service Department: (707) 763-1010,
ext. 121. Please display your RA Number
prominently on the front of all packages.
5
I N T R O D U C T I O N
Thank you for purchasing a Furman Merit
Series Power Distributor or Conditioner, and
congratulations on your choice. The Merit
Series power conditioners feature excellent
surge protection as well as RFI / EMI filtration.
S A F E T Y I N F O R M AT I O N
To obtain best results from your Furman Merit
Series unit, please read this manual carefully
before using.
WA R N I N G
To reduce the risk of electrical shock, do not
expose this equipment to rain or moisture.
Dangerous high voltages are present inside
the enclosure. Do not remove the covers.
Refer servicing to qualified personnel only.
The lightning flash with an arrowhead symbol
is intended to alert the user to the presence
of un-insulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
I M P O R TA N T S A F E T Y
I N S T R U C T I O N S
(Please read prior to installation)
1. Please read and observe all safety and
operating instructions before installing your
Merit Series unit. Retain these instructions for
future reference.
2. Your Merit Series unit should not be used
near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, near a swimming pool, etc.
3. Do not place your Merit Series unit near
heat sources such as radiators, heat registers,
stoves, or other appliances that produce heat.
4. The Merit Series units should only be
connected to a 120 VAC, 60Hz, 15 amp
grounded electrical outlet. Do not defeat the
ground or change polarization of the power
plug.
5. Route the power cord and other cables so
that they are not likely to be walked on, tripped
over, or stressed. Pay particular attention to
the condition of the cords and cables at the
plugs, and the point where they exit your Merit
Series unit. To prevent risk of fire or injury,
damaged cords and cables should be replaced
immediately.
6. Clean your Merit Series unit with a damp
cloth only. Do not use solvents or abrasive
cleaners. Never pour liquid on or into the unit.
7. Your Merit Series unit should be serviced by
qualified service personnel when:
• The power supply cord or the plug has been
frayed, kinked, or cut.
• Objects have fallen or liquid has spilled into
the unit.
• The unit has been exposed to rain or other
moisture.
• The unit does not appear to operate normally.
• The unit has been dropped, or the enclosure
has been damaged.
• The retractable lights have failed.
8. Your Merit Series unit requires that a safety
ground be present for proper operation. Any
attempt to operate the unit without a safety
ground is considered improper operation and
could invalidate the warranty.
9. Do not attempt to service your Merit Series
unit beyond what is described in this manual.
All other servicing should be referred to
qualified service personnel.
2