Fisher-Price BARBIE JAMMIN' JEEP H3427 - Manual (Page 10)

H3427a-0920
Grille
Tab
Tab
Slot
Slot
Lens
Lens
Wide
Notch
Lens Guard Wide Tab
Lens Guard
• Turn the vehicle upright.
• Position the steering wheel so that the large opening is UP as shown.
The tab on the steering wheel stem should also be UP.
• Fit the steering wheel onto the steering column.
• Insert a #6 x 1
1 /
2
" screw into the hole in of the steering wheel stem
and tighten.
Steering
Wheel
Steering
Column
• Fit the wide notch in the side of a headlight lens under the wide tab
on a lens guard.
• Press firmly on the inside of the headlight lens to snap it into the
lens guard.
• Repeat this procedure to assemble the other headlight lens to the
remaining lens guard.
• Fit a lens assembly tab into the headlight slots in the grille.
• Press firmly to snap the lens assembly into the grille.
• Repeat this procedure to snap the other lens assembly into
the grille.
10
ASSEMBLY F
9
8
H3427a-0920
7
Tab UP
Large Opening UP
SIDE VIEW
FRONT VIEW
12
• Insert a #8 x 5 /
8
" screw through the hole in the end of the
steering column.
• Fit a #8 lock nut (rounded side out) on the end of the screw
and tighten.
• While holding the lock nut with an adjustable wrench (or pliers),
tighten the screw.
End of
Steering
Column
#8 Lock Nut
#8 x 5 /
8
" Screw
12 6