Fisher-Price POWER WHEELS J1718 - Manual (Page 8)

8
No status light No power Make sure power fl ow to the wall outlet
to charger is “ON”.
Loose connections Check connections of all plugs. Make
sure the charger connector is tightly
plugged into the battery and the power
cord connector is tightly plugged into
both the charger and the wall outlet.
Bad charger There is no sure way to tell if your
charger is working unless you have
a volt meter. If you suspect there is
a problem with your charger, contact
Power Wheels
® Consumer Relations.
Wrong battery This charger is intended for use only
with a Power Wheels
® 12-volt lead
acid battery.
Flashing red Loose connections Check connection of all plugs. Make sure
status light the charger connector is tightly plugged
into the battery and the power cord
connector is tightly plugged into both the
charger and the wall outlet.
Undercharged Battery needs a 100% (solid green)
battery charge every other use.
Battery dead Replace battery with a new,
Power Wheels
® 12-volt lead acid battery.
Solid red Undercharged Charge battery 100% (solid green) or
status light battery Ready for Use (fl ashing green).
Problem Possible Cause Solution
PROBLEMS AND SOLUTIONS