Fine Digital 400 - Manual (Page 16)

031
F400 030
2. Tap on a Stopover Category.
3. Enter the Stopover information.
2.2.10.12. Clearing a Selected Destination
To cancel a selected destination, do one of the following:
1. Tap on the Menu button > Destinations option.
2. Tap on the Clear button on the Destination
Options screen.
The screen displays in Map View mode.
Refer to the Entering a Destination section for the steps to
enter information for each specific category.
2. Tap the road to avoid.
3. Tap the Avoid button.
A red x displays in the column to the left of the
selected road.
4. Repeat steps from 1 to 3 for each road to avoid.
5. Tap the Nav button to recalculate the route.
2.2.10.11. Entering Stopovers
You may use stopover to setup different destinations. This
feature allows you to have several destinations along a route.
To enter a stopover:
1. Tap the Stopover Button on the Destination
Option screen. The Stopover screen displays.
To cancel a selection, select a road and tap the Clear button.
To cancel all selections, tap the Rst button.