Nmea 2000, Gps100 antenna, Pin connector – Faria Instruments MG2000 User Manual
Page 28: Heat shrink tubing
RED - IGNITION
MG2000 Tachometer
6
5
4
3
2
1
7
8
9
10
11
12
1
2
3
6
5
4
NMEA 2000
Harness HN0401
NMEA 0183 Cable
6- pin connector
Pin 1 Not Used
Pin 2 Not Used
Pin 3 Red/ White
Pin 4 Red/ Blue
Pin 5 Not Used
Pin 6 Not Used
4 3
NMEA 0183-A
NMEA 0183-B
Red/ White
Brown*
Red (Ignition)
White*
Yellow*
Green (0183-A)
Shield (Ground)
Red/ Blue
GREEN - 0183A
SHIELD - GROUND
GPS100 Antenna
Ground
Not Used
Not Used
Not Used
*Note:
1) Cut off the connector at the end of the antenna cable
2) Cut off the following wires because they are not used: White, Yellow, Brown
3) Cut wires so that they are different lengths. This ensures they do not touch each other.
Heat
Shrink
Tubing
Page 24
This manual is related to the following products: