Furuno FCV-620 - Manual (Page 16)

1. OPERATION
7
the menu window (left) is displayed to gray.
You may also use
X
to move the cursor.
4. Use
S
or
T
to choose the menu item
desired and press the ENTER key.
The selected setting box or window appears.
Setting box Setting window
5. Use
S
or
T
to choose an option.
6. Press the ENTER key to save the setting.
The setting box or window disappears. To
escape without changing setting press the
MENU/ESC key instead of the ENTER key.
7. To choose another menu press the MENU/
ESC key.
The cursor (yellow) moves to the menu
window. You may also use
W
to move the
cursor.
8. Press the MENU/ESC key to close the
menu.
1.9 Shifting Range
The basic range may be shifted up or down in
the Manual mode as follows:
Range and display shift concept
Note: This function is inoperative when Auto
mode is selected on the range setting window.
1. Press the MENU/ESC key to open the menu.
2. Use
S
or
T
to choose Sounder and press
the ENTER key.
3. Use
S
or
T
to choose Shift and press the
ENTER key.
Shift setting window
4. Use
S
or
T
to choose the amount of shift
desired and press the ENTER key.
The step for the amount of shift depends on
setting range on the Range sub menu of the
System menu.
5. Press the MENU/ESC key twice to close the
window.
Note: The echo may be lost if the amount of
shift is greater than actual depth.
Off
On
Depth Size
[ENTER] : Set
[MENU] : Cancel
Small
Medium
Large
Display
Window can be
shifted up and
down to select
starting depth.
Unit: ft Unit: m
Range Step Range Step
7 - 10 2 2 - 5 1
11 - 20 5 6 - 10 2
21 - 50 10 11 - 20 5
60 - 100 20 21 - 50 10
110 - 250 50 60 - 100 20
260 - 500 100 110 - 250 50
550 - 1000 200 260 - 500 100
1100 - 2500 500 550 - 800 200
Unit: fa Unit: pb
Range Step Range Step
2 - 5 1 2 - 5 1
6 - 10 2 6 - 10 2
11 - 20 5 11 - 20 5
21 -50 10 21 - 50 10
60 - 100 20 60 - 100 20
110 - 250 50 110 - 250 50
260 - 400 100 260 - 450 100
Shift
[ENTER] : Set
[MENU] : Cancel