Furuno FCV-620 User Manual
Page 25
1. OPERATION
16
4. Press the ENTER key.
Note: Applicable data must be input to the 12-
24 VDC/NMEA port in order to display the data
mentioned in the table below.
Graphic displays
Digital displays
Note: When data is lost 30 sec., the display
shows “- -” at the location where data is lost.
1.19.2 Screen division
1. Press the MENU/ESC key to open the menu.
2. Use
S
or
T
to choose Display and press the
ENTER key.
3. Use
S
or
T
to choose Nav Data 1 or Nav
Data 2 and press the ENTER key.
Nav Data setting box
4. Use
S
or
T
to choose screen division
desired and press the ENTER key.
5. Press the MENU/ESC key twice to close the
window.
Necessary data
Item
Longitude/latitude
position
Position, waypoint
data, course, range
and bearing, time-to-
go to destination, XTE
Bearing
Compass, heading
Wind speed, wind
direction, air pressure
Wind speed, wind
direction, air pressure
Two-data
display
Three-data
display
Four-data
display
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Items displayable in (1) - (3): speed (STW)*,
wind speed and direction*, destination
waypoint data*, compass*, heading*, depth,
position, course, range and bearing,
trip meter, odometer, water temperature,
air pressure, time-to-go to destination
waypoint, XTE*, speed (SOG)*
Items displayable in (4) - (9): depth, position,
speed (SOG), speed (STW), course,
range and bearing, trip meter, odometer,
water temperature, heading, wind speed,
wind direction, air pressure, time-to-go to
destination waypoint, XTE
* = Graphic display
XTE MARINA
XTE
0.20
nm
27.3
nm
Rng
PORT
SPEED (SOG)
SPEED (STW)
WIND True
WPT MARINA
COMPASS True
HEADING True
SOG: Speed over
ground
STW: Speed relative
to water
1234
ft
DEPTH
23 45.6789
N
123 45.6789
E
POSITION
12.3
kt
SPEED (SOG)
12.3
kt
SPEED (STW)
123.4
COURSE True**
1234
nm
123.4
RNG/BRG***
°
°
°
°
1234
nm
TRIP METER
1234
nm
ODOMETER
TEMP
°
123.4
F
HEADING True**
WIND SPEED True*
123.4
°
12.3
kt
WIND DIR. True*
123.4
°
BAROM PRESS
TIME TO GO
1234
hPa
12
H
34
M
XTE MARINA
0.50
nm
* : APP or TRUE, depending
on menu setting.
** : TRUE or MAG depending
on menu setting.
*** : To destination waypoint.