Franklin BES-1870 - Manual (Page 13)

Selecting a Book
To switch between the two built-in books, or to open a
book on an installed book card, open the Card menu.
1. Turn your unit on.
2. Press CARD.
Icons appear for each available book.
3. Press or to highlight your selection.
4. Press ENTER to select it.
5. Press CARD to return to the Card menu.
✓ BOOKMAN Card Troubleshooting
Make sure your book card is installed correctly. If
your card is performing erratically, follow the reset
instructions in “Resetting Your Unit” on page 85. If
this does not fix the problem, remove the card and
then remove the white rubber strip located between
the two metal pins. Clean the rubber strip with your
fingers and then replace it making sure it is
completely in its notch.
12