Franklin BOOKMAN DBD-2015 - Manual (Page 15)

30
B O O K MAN
Book Card Care
• Do not touch the metal
contacts on the book cards.
Caution: Touching these electrical
contacts with statically charged
objects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not expose the book cards
to heat, cold, or liquids.
• Do not put excessive pressure
on the book cards.
LBS.
Resetting Your BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
AN/AUS
(or
ON/OFF
) twice. If nothing hap-
pens, follow the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting your BOOKMAN erases
settings and information entered into its
built-in book, and in any installed book card.
1. Hold
CLEAR
and press AN/AUS .
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOK-
MAN. Look for it on the battery
cover or near the book card slot.
➤ Troubleshooting
• Make sure the book card is
installed correctly.
• Check that the book card’s metal
contacts are dirt-and dust-free.