Franklin EnglishFrench BFQ-470 - Manual (Page 32)

Using a Password
You can use a password to keep the information in the Databank private. The password is requested
when the unit is turned on and the Databank is accessed.
Password Warnings
Warning! After you set the password, you must enter the password to access the Databank for the
first time during a session. Always record your password and keep it in a separate place.
If you forget the password, you must reset the unit to access the Databank.
Warning! Resetting the unit erases all user-entered information. Always keep written copies of your
data.
If you have a reset button, use the end of a straightened paper clip to gently press the reset button.
If you do not have a reset button, or if the unit does not reset after pressing the reset button, remove
the batteries, wait at least two minutes, and then re-install them. For battery instructions, see
“Installing the Battery”.