Т³гж 15, Reattaching the bottom plate, Removing the bottom plate – Fantom Vacuum FANTOM FM780 User Manual

Page 15

Remove the bottom plate by pulling
the tabs as illustrated.

REATTACHING THE BOTTOM PLATE

OPEN

Pull here

Bottom Plate

Projection

Groove

Nozzle Head

Height Adjustment Lever

REATTACHING THE BOTTOM PLATE

REPLACEMENT INSTRUCTIONS

REMOVING THE BOTTOM PLATE

Insert the projection on the bottom plate
into the groove on the nozzle head
and set the bottom plate in place.

Push the bottom plate as shown.

Set the two screws to its original place.

Turn the vacuum over and place in the
upright position.

Press

Set the vacuum cleaner to the
parallel position and turn it over.

Unscrew the two screws as shown.