Fisher-Price T4838 - Manual (Page 10)

10
• Set the transmitter channel switch to the same channel as the receiver(s).
• Place the transmitter in the same room with child. Point the microphone towards the crib or play area.
• Unwrap and fully extend the AC adaptor for best transmission. Insert the AC adaptor pin into the DC
input jack on the transmitter and plug the power cord into a standard wall outlet. Use the power cord
only in a wall outlet. Do not plug into a ceiling outlet.
• Press the transmitter power button to turn the power ON (the button lights up).
• Press the night light button for a soft, glowing light. (Press again to turn off the night light.)
• Slide the night light timer switch to turn the timer on. When the timer is on the night light will
automatically shut off after 30 minutes.
Setup
Channel
Switch
Night Light Timer Switch
(Back Side of Transmitter) Night Light Timer Switch
(Back Side of Transmitter)
Power Button Power Button
Night Light Button Night Light Button
Channel Switch Channel Switch