Blade unit replacement, Changing cutting strips, Replacement accessories – FELLOWES PowerTrim User Manual
Page 7
7
Unplug PowerTrim. Remove
SafeCut™ Guard
(magnetic catch).
BLADE UNIT REPLACEMENT
Remove the cutter
blade unit by pulling
the button on the blade
unit. Replace with new
blade unit (#54125).
Tighten screws. Re-secure
SafeCut™ Guard.
Unscrew the 2 cross
head screws on either
side of the cutter blade
unit (Phillips type
screwdriver).
Unplug PowerTrim. Remove
SafeCut™ Guard (magnetic
catch).
CHANGING CUTTING STRIPS
Rotate small safety catches to release the cutting strip. Turn
cutting strip over to use other side of the strip . When all
areas have been used, replace cutting strip with new one
from accessory pack (#54125). Re-secure cutting strip and
SafeCut™ Guard again.
Make sure
SafeCut™
Clamp is open.
The following replacement parts are available for PowerTrim as a combined accessory pack (#54125):
REPLACEMENT ACCESSORIES
Item
Required
1 blade unit
After 2000 cuts
2 cutting strips
After 500 cuts
- DM17CS (2 pages)
- CC4 (3 pages)
- PS-65C (2 pages)
- DM12CT (10 pages)
- POWERSHRED P-48C (4 pages)
- POWERSHRED 480 CC (8 pages)
- 320CC (11 pages)
- S50 P500 (3 pages)
- Shredmate (4 pages)
- PS60-2 (6 pages)
- DS-12Ci (5 pages)
- SB-125i (4 pages)
- FS5M (12 pages)
- DM8C (21 pages)
- 420CC (8 pages)
- C-420C (8 pages)
- SafeCut Electron 180 (5 pages)
- CC4-2 (4 pages)
- Powershred 520CC (8 pages)
- S5 (6 pages)
- DM15C (2 pages)
- P600C (5 pages)
- SB-97CS (2 pages)
- P400C-2 (6 pages)
- DS-16Ci (5 pages)
- MS-470C (2 pages)
- PS-70 (2 pages)
- ShredStik II (3 pages)
- 380C-2 (21 pages)
- P500-2 (6 pages)
- POWERSHRED C-380 (2 pages)
- P-55C (2 pages)
- C-480C (8 pages)
- HD-10CS (2 pages)
- PS70-2 (8 pages)
- c120ci (2 pages)
- DS12Cs (4 pages)
- C-120C (2 pages)
- POWERSHRED C-480 (2 pages)
- FS 5+ S5 (4 pages)
- PS-67Cs (2 pages)
- 190 (8 pages)
- DM17Ci (5 pages)
- PDS-1 (2 pages)
- MS-460Ci (4 pages)