Franklin KJB-640 - Manual (Page 16)

14
Book Card Care
• Do not damage the contacts
on the book card or slot.
Caution: Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not expose the book cards
to heat, cold, or liquids.
• Do not put excessive pressure
on the book cards.
LBS.
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press CLEAR and then press
ON/OFF twice. If nothing happens, fol-
low the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting your BOOKMAN unit
erases settings and information entered
into its built-in book, and in any installed
books.
1. Hold CLEAR and press ON/OFF.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of your
BOOKMAN. Look for it on the bat-
tery cover or near the book card slot.
➤ Troubleshooting Tips
• Make sure your book card, if any,
is installed correctly.
• Check that the book card’s metal
contacts are dirt- and dust-free.