Farallon Communications NetLine USB 10/100 - Manual (Page 12)

12 Chapter 3
LED Blinking: The indicator blinks
green when data is received on the
100Mbps network and blinks yellow
when data is received on the
100Mbps network.
LED Off: If the LED is off, and you have
a network cable connected to the
adapter, it may indicate one of the
following:
■ The network cable is not properly
connected or is faulty.
■ No 10Base-T or 100Base-TX
device is connected at the other
end of the network cable.
■ The network cable exceeds 100
meters.
■ The device is not receiving power
from a USB por t or there is no
USB suppor t on your system.
■ You are using a straight-through
10Base-T or 100Base-TX cable to
connect directly to another work-
station.
■ You are using a cross-over cable
to connect to a hub.