Fantom Vacuum FM742CS - Manual (Page 8)

Parallel position
This position is used for cleaning under
furniture.
Handle Release Lever
Handle Release Lever
ON/OFF Switch
6
USING THE VACUUM CLEANER
ON/OFF SWITCH
Start or stop vacuum cleaner by pushing
on the switch.
ADJUSTING THE HANDLE
Upright position
The handle is normally locked in this
The handle of this vacuum cleaner can be set to one of
three positions -Upright, Normal, Parallel. Place your foot
on handle release lever as shown and pull back on the handle
until it releases from its upright position.
position for storage or when using the
attachments.
Push the handle forward
until it locks.
Normal position
This position is used for normal cleaning.
OFF ON