Furuno FM-8500 - Manual (Page 17)

13
Printer Interface (option)
Printer Interface IF-8500 is connected between the printer PP-510
and the transceiver unit. See outline drawing on page D-11.
Printer (option)
Refer to the printer outline drawing on page D-12 for mounting
dimensions.
1. Select a flat surface.
2. Fix the mounting base to the mounting location with four screws
(supplied).
3. Lay the printer on the top of the mounting base and fasten it with
the mounting fixtures (two at each side and one at rear).
Figure 4 Mounting of Printer PP-510
External Loudspeaker (option)
The external loudspeaker can be installed on a tabletop, the overhead
or a bulkhead. Fasten the loudspeaker to the mounting location with
tapping screw, or nuts, bolts and washers. For mounting dimensions,
see the outline drawing on page D-8.
Mounting Fixture
Mounting Dimensions 300 (H)
×
396 (W) mm
Mounting Fixture