Assembly – Fisher-Price NEW BEETLE L1114 User Manual

Page 18

ASSEMBLY

L1114pr-0920

• Fit the notches on the inside of a front wheel traction band to the

ridges on a front wheel, as shown.

Hint: Soak the traction band in hot water for about two minutes to
soften it.

Front Wheel

Traction Band

Wheel

Ridges

Notches

• Slide the other side of the front wheel traction band around the

front wheel.

• Turn the vehicle upright (or keep it on its side).
• Insert one of the tabs on the hubcap cover into a slot in the hubcap.
• Then, push with your fingernail (or carefully with a slotted screwdriver),

the other two hubcap cover tabs into the slots in the hubcap.

• Repeat assembly steps 27 - 31 to assemble the remaining wheel

(with round bushing and hex bushing) lock washer, front wheel
traction band, hubcap and hubcap cover.

Hubcap

Hubcap
Cover

Tab

Slots

• Place the steering wheel top face down on a flat surface.
• Fit the steering wheel bottom to the steering wheel top.
• Insert five #6 x

" screws through the steering wheel bottom and

into the steering wheel top. Tighten the screws.

Steering

Wheel

Bottom

Steering

Wheel

Top