Frymaster GF14 - Manual (Page 7)

1-3
The burner assembly can be configured for natural gas, propane, or manufactured gas, as required by
the customer. A drain is tapped into the center of the frypot, with a front-controlled manual ball
valve.
Each fryer is equipped with a thermostat for precise temperature control. The thermostat is located
near the centerline of the frypot for rapid response to changes in loads and to provide the most
accurate temperature measurement.
A high temperature thermostat (hi-limit) shuts off gas to the burner assembly if the controlling
thermostat fails.
1.4 Installation, Operating, and Service Personnel
Operating information for Frymaster equipment has been prepared for use by qualified and/or au-
thorized personnel only, as defined in Section 1.5.
All installation and service on Frymaster equipment must be performed by qualified, certified,
licensed, and or/authorized installation or service personnel, as defined in Section 1.5.
1.5 Definitions
QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL
Qualified/authorized operating personnel are those who have carefully read the information in this
manual and have familiarized themselves with the equipment functions, or who have had previous
experience with the operation of the equipment covered in this manual.
QUALIFIED INSTALLATION PERSONNEL
Qualified installation personnel are individuals, or firms, corporations, or companies which, either in
person or through a representative, are engaged in and are responsible for the installation of gas-
fired appliances. Qualified personnel must be experienced in such work, be familiar with all gas
precautions involved, and have complied with all requirements of applicable national and local
codes.
QUALIFIED SERVICE PERSONNEL
Qualified service personnel are those that are familiar with Frymaster equipment and who have been
authorized by Frymaster to perform service on Frymaster equipment. All authorized service
personnel are required to be equipped with a complete set of service and parts manuals and stock a
prescribed minimum amount of Frymaster equipment parts.
A list of Frymaster Factory Authorized Service Centers (FASC) is included with the fryer when it
ships from the factory. Failure to use qualified service personnel will void the Frymaster
Warranty on your equipment.