FieldServer FS-8700-23 - Manual (Page 10)

FS-8700-23 Cleaver Brooks Hawk Driver Manual Page 10 of 11
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Appendix A. Reference
Appendix A.1. Device Information Table
NETWORK INTERFACE UNIT
MAKE MODEL NAME
Honeywell Q7700 Network Interface Unit
Cleaver Brooks 833-2771 CB-Link
CONTROL MODULES
MAKE
MODEL No.
OF MODULE
MODULE NAME
PROPERTY FILE
NAME (.BP1;.BP2)
CONFIGURATION FILE
NAME (.CSV)
NOTES
Honeywell QS7700A BCS7700 N/A N/A
Honeywell QS7800A 7800 SERIES Control N/A N/A
Honeywell QS7800C
QM40XX Data
Acquisition Module
ON REQUEST QM40XX
Data Acquisition
Modules
Armstrong QS7800D Trapscan System ON REQUEST ON REQUEST
Honeywell QS7800E PulsaFeeder PULSAtrol PULSA PULSA
Honeywell QS7800A
S7830 Expanded
Annunciator
S7830 S7830
Expanded
Annunciator
Honeywell QS7800A
S7800
Keyboard/Display
Module
S7800 S7800
Honeywell QS7800A ST7800 Relay Module ST7800
Requires S7800
module
Honeywell
RM7800E,G,L,M Relay
Modules
RM78XX RM78XX
Honeywell
RM7840E,G,L,M Relay
Modules
RM78XX RM78XX
Honeywell N/A

Q7700A,B
CB-Link 833-2727 Display Module N/A N/A
CB-Link 833-2729
Data Control Bus
Module
N/A N/A
CB-Link 833-2734 CB 783 ON REQUEST ON REQUEST
Requires 833-2727 or
833-2729 on module
CB-Link 833-2734 CB 780 ON REQUEST ON REQUEST
CB-Link 833-2734 CB 784 ON REQUEST ON REQUEST
Appendix A.1.1. Property Files
Each Controller interfacing to the FieldServer requires associated property files (denoted by file extensions .bp1
and .bp2) to be loaded into the FieldServer. The property files listed in the device information table (Appendix A.1)
are preloaded onto the FieldServer when delivered. Other property files may be available upon request.

This is the chassis that the above modules plug into