Freecom Technologies 350 - Manual (Page 24)

4
Freecom MediaPlayer
EN
. Set Network Configurations
After connecting the LAN cable, you have to set network configurations of Computer
and Freecom MediaPlayer. You need to share a folder on Windows computer and use
same 'IP address range' and same 'Subnet Mask ' between Windows computer and
Freecom MediaPlayer.
For example:
Computer Network Freecom MediaPlayer
IP address 192.168.1.2 192.168.1.3
Subnet Mask 255.255.255.0 255.255.255.0
It is possible to assign IP address and Subnet Mask of the Freecom Me-
diaPlayer as Dynamic or Static.
. Wireless LAN Connection
Freecom MediaPlayer supports two types of wireless structure modes: Infrastructure
mode & Ad-Hoc mode.
Ad-Hoc Mode Infrastructure Mode (AP)
Ad-Hoc Mode
1:1 wireless LAN connection type between wireless adapter and Freecom MediaPlayer
without wireless access point.
Infrastructure Mode (AP)
Wireless LAN connection type with Wireless Access Point.
Wireless AP (Infrastructure Mode) or Wireless Adapter (Ad-Hoc Mode)
is needed for wireless connection. IEEE 0.11g wireless standard is
recommended for better wireless environment. Freecom MediaPlayer
is compatible with IEEE 0.11g & b standard.