FELLOWES DS-12Ci - Manual (Page 4)

AUTO
AUTO AUTO
AUTO AUTO
12
AUTO AUTO
12
AUTO AUTO
AUTO AUTO
12
AUTO AUTO
12
AUTO AUTO
12
2
Press ( ) ON to
activate (blue)
PAPER OR CD/CARD
BASIC SET UP AND SHREDDING OPERATION
1
To shred CDs rotate
CD flap into place
4
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Feed into paper entry
and release If paper is misfed and
stops shredding, all
indicator lights will
illuminate and shredder
will pause for 3-6
seconds
Shredder will take fewer sheets,
but if indicator is below yellow,
you can add more sheets without
fear of jamming
2
Increase the number of sheets
being fed up to the top yellow light
to maximize your productivity If there is too much paper for
the shredder to power through,
it will reverse the paper out for
easy removal Reduce paper quantity to an
acceptable amount and refeed into
paper entry
If too many sheets, indicator will
light up to red and shredder will
not take paper Remove several sheets until the
indicator is below red and the
shredder will take the paper Automatic correcting action
will power through the misfed
paper, so shredding can
continue (do not add more
paper during flashing)
SET-UP AND TESTING MISFED PAPER
2
AUTO AUTO
12
3
AUTO AUTO
12
3
1
3
paper entry and release
1
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation:
12-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
12-minutes will trigger
20-minute cool down period.
Hold CD/card at edge,
feed into CD/Card flap
entry and release
5
When finished
shredding set
to OFF ( )
6
AUTO AUTO
12
2
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
AUTO
2 3
CASTER INSTALLATION
AUTO
1 2 3
AUTO
1 AUTO AUTO
1 2 3
AUTO
2
AUTO
1 2 3
AUTO
3
AUTO
1 2 3
AUTO
4
AUTO
1 2 3
AUTO
5
If Remove Paper icon ( ) is
illuminated, press reverse and
remove paper
3