Fender KXR SIXTY (KXR 60) User Manual

Page 4

EFFECTS RETURN JACK-

This balanced jack inputs

signal to the Master Volume control which drives the

power amp section. It automatically disconnects the

preamp when used. This jack is useful with the effects

loop feature, or when using the KXR 60 as a slave

amp.

MASTER VOLUME CONTROL-

This control adjusts the

level of the signal coming out of the preamplifier sec-

tion. This control is used in conjunction with the

Channel Volume control to set the overall sound level

of the amplifier. In order to maximize headroom and

minimize noise, instruments with low-level output will

require a high Channel Volume setting and a low

Master Volume setting, while other instruments will

require a lower Channel Volume and higher Master

Volume setting. It is recommended that the Master

Volume control be set as high as possible for maxi-

mum DELTACOMP

compressor range.

TAPE IN JACK-

Two RCA style jacks provide an input

for an unbalanced, mono signal from a tape player or

CD player. This signal is summed with the signal from

the preamp inputs and provides the user the ability to

play along with pre-recorded music.

HEADPHONE JACK-

This jack allows the use of stereo

headphones for private listening. When this jack is

used, the internal speaker is disconnected. WARN-

ING: BE CAREFUL WHEN USING HEADPHONES, AS

EXCESSIVE VOLUME WILL DAMAGE YOUR HEAR-

ING.

POWER INDICATOR-

When this LED is illuminated,

the KXR 60 is receiving power.

POWER SWITCH-

This switch turns the KXR 60 On or

Off.