Flymo Cordless Multi-Trim MCT250 - Manual (Page 11)

10
MAINTENANCE
Fault Finding Hints & Service Recommendations
Fault Finding Hints
1. Line too short
Manually feed out the line.
2. Line broken inside cutting head
Remove cap and re-thread line.
3. Line jammed on spool
Remove cap and spool and rewind line to
remove crossed loops.
4. Excess line feed
Battery needs to be charged.
5. Poor performance
Ensure inside of cutting head housing is
clean and free from debris.
6. Trimmer stops during use
Release switch lever and wait 30 seconds
before re-starting.
Service Recommendations
1. Always use genuine Flymo Spare Parts.
2. Prepacked spares are available from
most Flymo/Partner stockists.
3. If you have a problem with your machine
contact your local Approved Service
Centre ensuring you have full details of
your product as described on the product
rating label.
4. Should it be necessary for work to be
carried out by your Service Centre, it
is important to take your complete
machine with you.
5. In the event of further difficulty please
contact:-
Flymo/Partner, Customer Service
Flymo/Partner
a division of Electrolux Outdoor
Products
Preston Road
Aycliffe Industrial Estate,
NEWTON AYCLIFFE,
Co. Durham.
DL5 6UP
Telephone: (01325)
300303
Fax : (01325) 318193
A network of specialist dealers can be found
in your local Yellow Pages.
To obtain service on your Flymo product
simply telephone or visit your local Service
Centre.
Should you require service under the terms
of our guarantee the Service Centre will
require proof of purchase.
All of the centres listed stock genuine
Flymo Spare Parts.
NOTE:
Our Service Repairers act on their own
behalf and are not empowered to commit
or legally bind Flymo/Partner in any
manner whatsoever.