Fantom Vacuum FM741HV - Manual (Page 9)

1
2
R
ug/Floor (Tools) Selector
The RUG/FLOOR(TOOLS)selector should only be
adjusted while the vacuum cleaner is turned on
and in the upright position.
When cleaning a rug or carpet,first
turn the ON/OFF switch to the ON
position,and then set the RUG/
FLOOR(TOOLS)selector to the
RUG position.
When cleaning a bare floor or when using
one of the attachments,set the RUG/FLOOR
(TOOLS)selector to the FLOOR position.
Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum
cleaner is turned off.
RUG
FLOOR
Rug/Floor (Tools)
SELECTOR
USING THE VACUUM CLEANER
E
dge Cleaning
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges
near baseboards and stationary furniture.
7
Variable Suction Control
The suction force can be adjusted to several settings
between
"MIN" and " MAX".
To strengthen the suction force, turn the
variable suction control to the "MAX" position.
MAX:When a strong suction force is necessary for
cleaning dust and dirt that is hard to remove.
MIN:When a weak suction force is necessary in cases
such as when you wish to clean quietly.
To weaken the suction force, turn the variable
suction control to the "MIN" position.
Variable Suction
Control
MIN MAX