Fisher PC-27S10 - Manual (Page 13)

13
RESET TING THE TV
Press the RESET key to automatically reset the television to factory settings. These features will automatically reset:
• Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer, and Tone
• Channel Memory
• Audio to Stereo
• Caption to OFF
• V-Guide to OFF
• Language to English
• Sleep Timer (if previously set)
If desired, personal settings can be made again
using the menu options.
Press RESET key
again to return
factory preset and
begin channel search
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: Never spray liquids on the screen because they can run down and
drip onto the chassis. This may cause component failure not covered
under Warranty.
SETTING THE SLEEP TIMER
The Sleep Timer will switch off the TV automatically.
1. Press the SLEEP key.
2. Use the 0 key to select the desired time
(from 30 minutes up to 3 hours).
Note: The Sleep Timer cancels when the TV is turned
off or if a power failure occurs.
Sleep : 0:30
Use 0 key
Sleep : 1:00
Sleep : 1:30
➧
Sleep : 2:00
Sleep : 2:30
Sleep : 3:00
Sleep : Clear
INPUT
MENU
MUTE
SLEEP
V-GUIDE
DISPLAY
CAPTION
RECALL
RESET
CH
POWER
VOL VOL
1 2 3
4 5 6
7 8 9
0
4 5 6
7 8 9
0
1 2 3
❷
❶