Fisher-Price L0542 - Manual (Page 7)

7
Assembly
10
Base
• Insert the frame front legs onto the remaining base.
• Fit a screw retainer over a hole in the front leg.
• Insert a #10 x 2,2 cm
black screw through the screw retainer and
front leg. Tighten the screw.
• Repeat this procedure to secure the other end of the base with the
remaining screw retainer and #10 x 2,2 cm black screw.
Hint: The #10 x 2,2 cm black screws may have been assembled
to the screw retainers.
Screw Retainers
11
• Push each seat height adjuster to be sure they are completely on the
seat bottom tubes.
• Insert a #8 x 1,9 cm screw through each seat height adjuster and the
ends of the seat bottom tube. Tighten the screws. This may require
extra force.
Seat Bottom Tube Ends
PUSH PUSH