FUJITSU A6210 - Manual (Page 23)

23
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.) The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Figure 16. Boot Menu
Table 16: Fields, Options and Defaults for the Boot Menu
Menu Field Options Default Description
Boot-time
Diagnostic Screen: ■ Disabled
■ Enabled
[Disabled] Turns on and off the diagnostic screen instead of Fujitsu logo screen
during Power On Self Test.
Boot Menu: ■ Disabled
■ Enabled
[Enabled] When Disabled, the Boot Menu is disabled and the [F12] key is
ignored. When Enabled, the Boot Menu is enabled.
Preboot Execution
Environment: ■ Disabled
■ Enabled
[Enabled] Turns on and off the preboot execution environment feature.
Boot Device
Priority — — This menu allows setting up the source for the operating system.
See “The Boot Device Priority Submenu” in the following section.
F1 Help
ESC Exit
Select Item
Select Menu
Item Specific Help
[Disabled]
Display the logo screen
during boot.
[Enabled]
Display the diagnostic
screen during boot.
Boot Time Diagnostic Screen:
Boot Menu: [Enabled]
Preboot Execution Environment: [Enabled]
Boot Device Priority
▲
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
[Disabled]
Info System Advanced Security Boot Exit
Phoenix SecureCore(tm) Setup Utility
B o o t M e n u