Fisher-Price NICK JR DORA THE EXPLORER J5242 - Manual (Page 6)

6
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
Seat
Helpful Hint: The seat can be attached to the frame in any
of three positions, depending on the size of your child. Check
your child’s fit on the trike by observing the seat to pedal
distance, as it is being ridden. If the pedals seem too far
away or too close for your child, move the seat up or down.
Attaching the Seat
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry cloth
to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying the label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
Label Decoration
Lower Position Middle Position Upper Position
Tabs
Slots
Seat
Retainer
5
(Place label 6
on opposite side
of seat)
(Place remaining
label 9’s on
opposite side of
front wheel)
12
(Place label 11
on opposite side)
10
9
8
13
SIDE VIEW
DASH VIEW
(Place label 4 on
opposite side)
3
(Place label 2 on
opposite side)
1
7