Frymaster Enodis MRE14 SERIES User Manual
Page 66
2-34
2.6 Frypot Assemblies and Associated Parts cont.
ITEM PART
#
COMPONENT
1
Frypot
Assembly
(does not include Item 6)
2 823-5545SP
Frypot,
Full-Vat
Filter with Insulation
(for use on EPRI units)
3 823-5359SP
Frypot,
Full-Vat
Filter w/o Insulation
(for use on Standard units)
4
823-5551SP Frypot, Dual-Vat Non-Filter with Insulation
(for use on EPRI units)
5 823-5482SP
Frypot,
Dual-Vat
Filter w/o Insulation (
for use on Standard units)
6
Thermostat
Assembly,
High-Limit
826-2454
Non-CE Full Vat 425°F (218°C) (17kW FV and 14kW FV) (Color
Coded Black 806-7543)
826-2456
Non-CE Dual Vat 435°F (224°C) (22kW, 17kW DV and 14 kW DV)
(Color Coded Red 806-8035)
826-2455
CE Full and Dual Vat 415°F (213°C) (14kW and 17kW CE) (Color-
Coded Yellow 806-8132)
7
812-0211
Insulation, Kaowool 17-inch X 10-inch X ½-inch
(4 required per pot)
8
900-4100
Retainer, Side Insulation
9
900-4101
Retainer, Front Insulation
10
900-1345
Retainer, Rear Insulation
11
826-1376
Nut, 10-32 Keps Hex
(Pkg. of 10)
NOTES: The frypots for EPRI-equipped units are insulated; those for non-EPRI (standard) units
are not. EPRI frypot assemblies 806-5545SP and 806-5551SP consist of the Items 2 and 4
respectively, plus insulation (Items 7-10). When replacing insulation or adding insulation to a
bare frypot, the individual pieces (sides, front, and back) are cut to fit from Item 7 when installed.
Each frypot requires four uncut pieces of insulation.