Ther settings, Auto preset ch – FUNAI IWF2706 User Manual
Page 28
28
EN
4
For TV channels
• Using [CH K/L], select
"AUTO PRESET CH(TV)".
• Press [VOL X].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
analog broadcasting will be displayed.
4
For CATV channels
• Using [CH K/L], select "AUTO PRESET
CH(CATV)".
• Press [VOL X].
Scanning and memorizing the channels auto-
matically starts.
• When the scanning and memorizing are com-
pleted, the memorized smallest channel in the
CATV will be displayed.
AUTO PRESET CH(CATV)
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
AUTO PRESET CH(TV)
ADD/DELETE
AUTO PRESET CH(TV)
AUTO PRESET CH(CATV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
AUTO PRESET CH
If you switch wires (e.g. between antenna and
CATV) or if you move the TV to a different area
after the initial setting, you will need to perform
AUTO PRESET CH again. This function lets you
easily select the receivable channels with [CH K/L]
and the TV memorizes them even if you switch
wires.
When scanning TV or CATV only
1
Select analog mode by pressing [DTV/TV].
2
Display the menu screen.
• Press [MENU].
The following menu screen is displayed.
3
Select "CHANNEL SET".
• Using [CH K/L], select "CHANNEL SET".
• Press [VOL X].
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
TV
NOTE:
• Make sure if the TV is connected to antenna or cable.
When aerial antenna is connected, select “AUTO PRE-
SET CH (TV)” or “(TV/DTV)” at step 4. When connected
to CATV, select “AUTO PRESET CH (CATV)”.
1
2
3
4
5
6
7
8
9
0
+100
-/ENT
o
p
m
n
MUTE
SLEEP
AUDIO
MENU
INFO
INPUT
SELECT
DTV/TV
POWER
CH
VOL
VOL
MENU
CH K / L
VOL X
O
THER SETTINGS