Fujitsu Siemens Computers LifeBook B6220 - Manual (Page 21)

21
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 12. Hard Disk Security Submenu
Table 12: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Drive0: ___ Clear A display-only field. Set is displayed when the Drive0 Password is set and
Clear when it is not.
Set Master
Password ___ [Enter] Sets, changes or cancels Master Password. The Master Password may be up to
eight characters long and include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. To cancel a password press the Enter key
instead of entering characters in the Enter New Password field and in the Re-
enter New Password field. When a Primary Master Password is set it must be
used to access the hard disk. Data on the hard disk cannot be read on other
systems.
Set User
Password ___ [Enter] Sets, changes or cancels User Password. The User Password may be up to
eight characters long and include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. To cancel a password press the Enter key
instead of entering characters in the Enter New Password field and in the Re-
enter New Password field.
Password Entry
on Boot: • Disabled
• Enabled [Enabled] When set to Disabled, it is not necessary to enter a hard disk password before
booting. The hard disk is still password-protected without password entry.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Drive0: Clear
Set Master Password [Enter]
Set User Password [Enter]
Password Entry on Boot: [Enabled]
S e c u r i t y M e n u