Franklin Advanced Thesaurus ATH-440 - Manual (Page 5)

4
The BOOKMAN 440 model uses
two CR2032, 3-volt batteries. Here
is how to install or replace them.
Warning: When the batteries lose
power or are removed from BOOK-
MAN, information that you have en-
tered in its built-in book as well as in
any installed book cartridge will be
erased.
1. Turn BOOKMAN over.
2. Slide off its battery cover in
the direction of the triangle.
3. Install the batteries with their
plus signs facing you.
4. Replace the battery cover.
Warning: Never install or remove a
BOOKMAN cartridge when your
BOOKMAN is on. If you do, informa-
tion you have entered in the built-in
book as well as in the cartridge will be
erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs of the cartridge
with the notches in the slot.
4. Press the cartridge down
until it snaps into place.
Installing Cartridges Installing Batteries
➤ Removing Cartridges
Warning: When you remove a
BOOKMAN cartridge to install an-
other, information that you entered
in the removed cartridge is erased.
➤ Resuming Where You Left Off
You can turn off BOOKMAN at
any time. When you turn BOOK-
MAN on again, the screen that
you last viewed appears.