FUJITSU A1010 - Manual (Page 13)

13
EXIT MENU
The Exit Menu provides information about the BIOS,
and allows you to exit the utility, reset defaults, or restore
the system to the settings it had before entering the SCU.
Figure 17. Exit menu
Exit Menu consists of five submenus, as detailed below:
Save and Reboot submenu
The Save and Reboot submenu allows you to save any
settings you have made to the BIOS (by clicking [OK].
When you click [OK], you will exit the utility and the
system will reboot.
Figure 18. Save and Reboot submenu
Exit (No Save) submenu
The Exit (No Save) submenu allows you to exit the
utility without saving any changes that you made during
the current session (by clicking [OK]. When you click
[OK], you will exit the utility.
Figure 19. Exit (No Save) submenu
Default Settings submenu
The Default Settings submenu allows you to restore the
BIOS settings to the original factory default settings (by
clicking [OK]. When you click [OK], you will exit the
utility and the default settings will be restored.
Figure 20. Default Settings submenu
Restore Settings submenu
The Restore Settings submenu allows you to exit the
utility without saving any changes (by clicking [OK].
When you click [OK], you will exit the utility and restore
your custom settings.
Figure 21. Restore Settings submenu
Save and Reboot
Exit (No Save)
Default Settings
Restore Settings
Version Info
Save and Reboot
OK Cancel
Press to save the current
setup parameters to CMOS RAM.
The computer will be rebooted!!!
Exit (No Save)
OK Cancel
Press to Exit the SCU.
The current settings will not be saved!!!
Default Settings
OK Cancel
Do you wish to change the current setup
to the system default values?
Restore Settings
OK Cancel
Do you wish to change the current setup
to the original custom values?
E x i t M e n u
Pine BIOS.fm Page 13 Tuesday, June 4, 2002 10:41 AM