Fisher VPC-R1 - Manual (Page 48)

USING THE FLASH [
v]
The flash is used not only in dark conditions, but also when the subject is in
the shade or is lit from the back. The four flash modes (automatic flash,
forced flash, flash off, and red-eye reduction) allow you to select the mode
appropriate for the surrounding conditions. The flash can be used only in the
still image shooting mode. Note that the effective flash range is 0.5 to 2.1 m
for normal photography, and 0.2 to 0.5 m for macro photography.
1
Display the Shooting Settings screen for the
still image shooting mode (see page 35).
2
Select the flash menu.
3
Select the desired flash mode from the flash
menu.
œ Press [c] on the arrow button to select the flash
mode.
f: (automatic flash) The camera will detect
the brightness of the subject and use the
flash or not as required.
d: (forced flash) The flash operates with
every picture taken, regardless of the
surrounding conditions. Use this setting
when the subject is in the shade, under
backlight conditions, under fluorescent
lighting conditions, etc.
18
Flash menu
43 English