Fisher-Price R4743 - Manual (Page 5)

5
Infant
Fit the bathtub to the sink, or place on a flat surface. •
Fit the plug into the hole in the bottom of the bathtub. Fill •
the bathtub with as little water as possible to bathe baby.
ALWAYS test water temperature in the product with your
hand or elbow before placing baby in this product.
Note: This product includes a temperature guide to help gauge
the water temperature (see Temperature Guide section).
Carefully place baby in the bathtub. •
Infant Insert
Fit the infant insert in the bathtub. •
Newborn
• Fit the clips near the rounded end of the sling to the notch
on each side of the bathtub opposite the plug. Fit the clips
on the other end of the sling to the remaining notches on the
other end of the bathtub.
Clips Clips
• Fit the bathtub to the sink, or place on a flat surface.
• Fit the plug into the hole in the bottom of the bathtub. Fill
the bathtub with as little water as possible to bathe baby.
ALWAYS test water temperature in the product with your
hand or elbow before placing baby in this product.
Note: This product includes a temperature guide to help gauge
the water temperature (see Temperature Guide section).
• Carefully place baby on the sling.