Fisher-Price GEOTRAX R2771 - Manual (Page 5)

5 6
Assembly and Setup
Mountain
Fit the mountain onto the bridge track. Push to “ • snap”
in place.
Fit the tabs on the upper ramp into the slots in the •
lower ramp.
Insert two screws into the upper ramp. Tighten the screws
•
with a Phillips screwdriver. Do not over-tighten.
Repeat this procedure to assemble the other upper and
•
lower ramps.
At an angle, fi t the tab on a trestle into the slot on the •
mountain. Push to “snap” in place.
Repeat this procedure to assemble the other trestle to
•
the mountain.
1 3 2 Mountain Track Trestle
Lower Ramp
Upper Ramp
Track pieces easily snap together. •
Place the vehicle on the track. •
Long straight track pieces sold separately and subject to availability. •
Hint: We do not recommend using the engine on carpets. For best performance, use on the
track provided or hard, flat surfaces.
Push down on Sherriff to hear fun phrases! •
4