Fig.10, Fig.11, Grease trap assembly – Fiesta FG50069 User Manual

Page 26: Providing power to your barbeque

GREASE TRAP ASSEMBLY

FIG.10

PROVIDING POWER TO YOUR BARBEQUE

IMPORTANT: To provide power to the barbecue,
plug a grounded electrical cord into rear receptacle box as shown.

Plug electrical cord into properly grounded GFI
(Ground Fault Interrupt) receptacle.
If use of an extension cord is required, be sure that it is a
minimum 16 AWG, 3 wire well insulated cord, marked for
OUTDOOR USE ONLY and properly grounded.

CAUTION: To ensure continued protection against risk of electric shock,
connect to properly earthed outlets only.

Transformer

Box

Step 2

IMPORTANT: Assemble light

switch wires to Internal Transformer

box as shown.

Light Switch

Wires

Grounded

Electrical Cord

Step 1

Step 3

Transformer

Cord

FIG.11

• Slide in grease pan

and Grease cup as
shown.

• Ensure grease trap and

cup are in position before
using the BBQ.

•

Plug the factory supplied,
three prong plug for the
transformer into the
receptacle box at the back
of the unit.