Farenheit Technologies TID-320 - Manual (Page 11)

Page - 10
Press / buttons on remote to adjust the audio setting data (or press the
knob on
front panel to adjust the setting data).
Press SEL button on remote again to save the setting data and return to current mode.
Notes:
If turn off the power, all the settings of each mode will be saved.
- If turn off the battery power, all the settings will be clear and become factory default setting.
- If you don’t adjust setting within 3 seconds after selecting the desired setting item, the unit will
automatically return to the current mode.
Menu Settings
Press MENU button on front panel or remote control to enter MENU setting.
During FM mode press the MENU button to enter the setting mode.
Press / buttons on the remote control or press the VOL knob on front panel to select the setting.
Press ENTER button or button on remote control or OK button on front panel to enter the setting.
Press / buttons on remote control or press the
knob on front panel to adjust the
setting.
Press ENTER button or button on remote control or OK button on front panel to confirm, press
MENU to return to last settings list.
• In Radio mode short and repeat press the OK button to select these settings:
AUDIO=> EXPERT => CLOCK
• In USB/Memory Card mode short and repeatedly press the OK button to select these settings:
AUDIO => PICTURE => EXPERT => CLOCK
z
AUDIO MENU
MENU DESCRIPTION(tuning by left or right arrow)
BASS Support 10 levels. Default level is 0.
TREBLE Support 10 levels. Default level is 0.
BALANCE
Support 10 levels for each left and right channel. Default is left equal to
right.
FADER
Support 10 levels for each front and rear channel. Default is front equal to
rear.
EQ DSP OFF FLAT→CLASSICS→POP→ROCK→DSP OFF
z PICTURE MENU
MENU DESCRIPTION
RED
Adjust level of red color. Support 50 levels. Default level is 25.
GREEN Adjust level of green color. Support 50 levels. Default level is 25
BLUE Adjust level of blue color. Support 50 levels. Default level is 25.
BRIGHTNESS Adjust level of screen brightness. Support 50 levels. Default level is 25
CONTRAST
Adjust level of screen contrast. Support 50 levels. Default level is 25.
SHARPNESS Adjust level of screen sharpness. Support 15 levels. Default level is 10
SCREEN Adjust screen size: 16:9 →4:3→FULL
COLOR
RESET
Resume color default status. (Select YES or NO by navigation buttons, and
press ENTER button on remote control or OK button on front panel to confirm
“YES”)