Furman Sound PL-PRO E II - Manual (Page 5)

SERIES II 16 AMP POWER CONDITIONERS
ADDITIONAL F E A T U R E S
All PL-PRO Series II models include an 8 foot,
1.5mm x 3 gauge heavy-duty power cable. A
rear mounted BNC jack accepts any standard
(12 VAC 0.5 amp) gooseneck lamp for rear
rack illumination.
PL-PRO SERIES II E, PE, DE & PDE
These models feature LED rack lights which
produce virtually no heat and provide an
extremely long life span. A dimmer control for
the rack lights allows the user to adjust the
level of illumination or simply switch the lights
off. A rear mounted BNC jack accepts any
standard (12 VAC 0.5 amp) gooseneck lamp
for illumination at the rear of the rack.
PL-PRO SERIES II E & PE
These models offer a 20-segment LED bar
graph meter that displays incoming voltage
between 180 and 256 volts in 4-volt steps. The
normal range voltages are indicated in green,
with moderately and extremely high or low
voltages in yellow and red respectively. The
voltmeter’s accuracy is ±4 volts. It can easily
be re-calibrated, if necessary.
4
2 3 0
2 3 0 00.5
PL-PRO PE II
PL-PRO PDE II
PL-PRO SERIES II DE & PDE
These models offer a laboratory-precision
digital meter that displays incoming voltage in
1-volt steps. The voltmeter’s accuracy is ±1.5
volt.
PM-PRO PE II
PM-PRO SERIES II E & PE
These models include two laboratory-precision
digital meters: a voltage meter that displays
incoming voltage in 1-volt steps, and a true
RMS current meter that measures the AC
power draw within 0.5 amp.