Furman Sound ElitE 20 PF - Manual (Page 4)

ElitE 20 PF ownEr’s manual
shake foundations with their weight and visceral
impact. Mid and high frequencies will bloom with
sweet, non-glaring ease while imaging improves
dramatically, all the while remaining true to your
system’s inherent virtues.
installation:
unpacking
Before unpacking your unit, inspect the carton
for any obvious severe damage to the box and
internal protective materials. If internal damage
is likely, contact the carrier who delivered the
unit before proceeding with unpacking. If, after
unpacking, shipping damage is evident, contact
the carrier. Save all shipping and packing
materials. You may need them if you should
ever have to return the unit to the factory for
servicing.
The box should contain the Elite-20 PF unit,
detachable AC cord, rack mount kit, owner’s
manual, and warranty registration card. If anything
is missing, please contact Furman Customer
Service. Fill out and return your warranty
registration card. Registration is recommended
because it can be used to establish whether the
unit is within the warranty period should your
original ownership documents be lost, and it
assists us in informing you about upgrades or
other vital information.
safety information - warnings
Please read and observe all of the safety and
operating instructions before the Elite-15 PF is
operated. Retain these instructions for future
reference.
•
Do not disassemble or modify in any way. No
user-serviceable parts inside
•
Keep away from moisture and avoid excessive
humidity
•
Do not allow liquids or foreign objects to
enter the unit
The Elite-20 PF should be serviced by qualified
service personnel when:
•
The power supply cord or plug has been
frayed or cut.
•
Objects have fallen or liquid has spilled into
the unit.
•
The Elite-20 PF has been exposed to rain or
other moisture.
•
The Elite-20 PF does not appear to operate
normally, or exhibits a marked change in
performance.
•
The Elite-20 PF has been dropped, or the
enclosure damaged.
The Elite-20 PF requires that a safety ground
be present for proper operation. Any attempt to
operate the Elite-20 PF without a safety ground
is considered improper operation and could
invalidate the warranty.
Power source
The power source to which the Elite-20 PF is
connected should be adequate for use at 20
Amps. The Elite-20 PF will operate with a 15
Amp service outlet; however, nuisance tripping
at the circuit breaker panel may result if the
systems continuous current draw exceeds 15
Amps.
Placement
The Elite-20 PF is manufactured with four
rubber feet for placement on any table, cabinet,
shelf, or floor. These rubber feet may be
easily removed with a standard Philips screw
driver when rack mounting adjacent to other
3