Care, Storage – Fisher-Price DELUXE PLUS HEALTHY CARE B0325 User Manual

Page 16

Care

• The pad, headrest and bib are machine washable. Wash

them separately in cold water on the gentle cycle. Do
not use bleach. Tumble dry separately on low heat and
remove promptly.

• The frame, base tray and mat may be wiped clean using a

mild cleaning solution and a damp cloth. Do not immerse
the base tray.

• The food trays are dishwasher safe. Simply remove the food

tray from the base tray and place in your dishwasher.

To remove the pad and headrest:
• Remove the four elastic loops from the pegs on the

underside and back of the seat.

• Unfasten the pad strap and headrest strap from the

seat back.

• Feed the shoulder portion of the waist/shoulder belts

through the slots in the seat back, the pad and the headrest.

• Feed the waist portion of the waist/shoulder belts and

crotch belt down through the slots in the seat.

• Remove the waist/shoulder belts and crotch belt through

the slots in the pad.

• Unfasten the pad fasteners from the front edge of the

seat bottom.

• Remove the pad.

To replace the pad and headrest: refer to Assembly
steps 16-23.
IMPORTANT! Never use this product without the
restraint system. Replace the waist/shoulder belts and
crotch belt.

Printed in China

B0325pr-0920

Fisher-Price, Inc., a subsidiary of Mattel, Inc.

East Aurora, New York 14052, U.S.A.

® and

designate U.S. trademarks of Mattel, Inc.

For other countries, outside the United States:

Canada: call 1-800-567-7724, or write to: Mattel Canada Inc., 6155
Freemont Blvd. Mississauga, Ontario L5R 3W2.
Great Britain: telephone 01628 500302.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland.

• Fit the holes on the base tray latches onto the pegs on the

back of the high chair frame.

• With the legs all the way open, lower the seat to position 1

(the lowest position).

• Pull the frame release latches forward and push the rear legs

toward the front legs.

Peg

Base

Tray

Hole

Pull Frame

Release Latch

Storage