Fujitsu Siemens Computers P1610 - Manual (Page 23)

23
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Security submenu is for configuring security chip features.
Figure 15. Table 16: Security Chip Setting Submenu
Table 16: Fields, Options, and Defaults for the Security Chip Setting Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field Options Default Description
Security Chip: ■ Disabled
■ Enabled
[Enabled] Allows you to enable or disable the Security Chip. When disabled,
the following field does not appear.
Clear Security Chip ____ [Enter] Allows you to clear the security chip. Note that if you clear the secu-
rity chip, you will not be able to access data that has already been
encrypted.
Security Chip State: ____ Enabled
Activated Display only. Indicates the current state of the security chip.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
▲
Main Advanced Security Power Savings Exit
Item Specific Help
PhoenixBIOS Setup Utility
Hard Disk Security
Security Chip: [Enabled]
Clear Security Chip [Enter]
Security Chip State: Enabled
Activated
Select Security Chip
enabled or disabled.
* A reboot is required
after exit to configure
Security Chip correctly.
Clear Security Chip
becomes selectable
after the reboot.
S e c u r i t y M e n u