FELLOWES MS-450Ci - Manual (Page 3)

AU TO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
3
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
PREvENTIvE MAINTENANCE ANd MISCELLANEOUS TROUBLESHOOTING
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
3
AU TO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
SafeSense
®
is active and
working properly
SAFESENSE ® TECHNOLOGY OPERATION
Touch test area and
look for the SafeSense
®
indicator to illuminate
Turn the shredder ON
( ) to activate SafeSense
®
SET-UP ANd TESTING
2 1
OILING SHREddER
• * For peak performance, we recommend oiling microshred shredders each time the waste bin is emptied. Only use a non-aerosol vegetable oil (Fellowes 35250).
Machines not oiled may lose sheet capacity, become noisy, and ultimately stop running.
• Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even
if there is no paper present. (Both paper detection sensors are located in the center of the paper entry).
• Once a day run shredder in reverse for 15 seconds to clear cutters.
• Empty wastebasket when bin full indicator lights up (bag # 36052).
• Shredder won’t run if the waste bin is not pushed all the way in, or bin needs to be emptied.
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs, the overheat indicator will alert you to the
problem, this model will require 25 minutes to cool down.
FOLLOW OILING PROCEdURE BELOW ANd REPEAT TWICE
* Apply oil across
entry and press
forward ( )
Shred one sheet Press and hold forward
( ) 2-3 seconds
5 3 3
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
1
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
AUTO AUTO
12
MS-4 60C i
2
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
12
AUTO
Continue 100% Jam
Proof Shredding
1 2 3
Up to RED: Too Many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
If a misfeed
occurs:
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
All indicators light up and
shredder pauses for 3 seconds Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
Remove several sheets until
indicator is below red.