Franklin CWQ-2056 - Manual (Page 5)

4
Once you have installed a book card in
your BOOKMAN, you can select which
book you want to use.
1. Turn your BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press or to highlight the
book you want to use.
4. Press
ENTER
to select it.
Warning: Never install or remove a
book card while your BOOKMAN is
turned on. If you do, information that
you entered in its built-in book and in
an installed book may be erased.
1. Turn your BOOKMAN off.
2. Turn your BOOKMAN over.
3. Align the tabs on the book
card with the notches in the
slot.
4. Press the book card down
until it snaps into place.
Installing a Book Card
➤ Removing a Book Card
Warning: When you remove a book
card to install another, information that
you have entered in the removed
book card will be erased.
Selecting a Book
➤ About Screen Illustrations
Some screen illustrations in this
User’s Guide may differ from what
you see on the actual screen. This
does not mean that your BOOK-
MAN is malfunctioning.