Fujioh FSR-3000 User Manual
Page 11
Conduit
Nut
Range
Hood
3. CONNECTING POWER SUPPLY WIRES
WARNING
: • Electrical wiring should be done by a qualified person(s) in
accordance with all-applicable codes and standards,
including fire-rated construction. An unqualified person
doing the work could result in fire, electric shock or injury.
• This range hood uses 120V AC. Do not connect to another
voltage since fire, electric shock or damage could result.
1
Remove the nut from the conduit
connector at the end of power wiring.
WARNING
: Be sure to switch
power OFF at service panel
before wiring.
2
Connect the conduit through the
connecting hole of the body using the
nut previously removed.
Conduit
Nut
Power
Wiring
12