Fisher & Paykel CoolDrawer RB36S - Manual (Page 27)

25
Temperature adjustment
Each of the storage modes will automatically default to
an ideal temperature setting. This setting provides the
recommended temperature for this storage environment.
However, if you want to increase or decrease the
temperature of the compartment, this can be done using
the Temperature adjustment control.
The recommended temperature is always the center light.
To adjust the temperature
The pre-set temperature for each storage environment will
show one illuminated light in the center of the scale
To increase the temperature, simply touch the ‘warmer’
icon (+).
Each light displayed will increase the temperature setting
slightly. When all four lights on the right are showing, you
have reached the warmest setting.
To decrease the temperature, simply touch the ‘colder’
icon (-).
Each light displayed will decrease the temperature setting
slightly. When all four lights on the left are showing, you
have reached the coldest setting.
General operating instructions
Fig.5 Adjusting temperature